Table of Contents

轴流风机画册图 1200x800

Liquid cooling moves heat away from processors, but the heat still needs a route out of the facility. For systems that reject heat to ambient air, fans remain part of the outdoor cooling equipment. LONGWELL’s downloadable 12-page axial fan brochure helps equipment manufacturers review EC and AC options using performance curves, dimensional drawings and electrical information.

Where Axial Fans Fit in Outdoor Heat Rejection?

In a dry cooler, fans move air across a liquid-to-air heat exchanger. The required airflow depends on the heat exchanger and the operating conditions, including the temperature of the entering air and the resistance of the coil and surrounding components. Air-cooled condensers serve a different part of a refrigeration circuit, but also require fans matched to the equipment.

For a new cooling platform or a second-source review, the useful starting point is the installed duty point: the airflow needed at the equipment’s static pressure. A headline maximum-airflow value does not describe every operating condition.

EC and AC Models Covered in the 12-page Brochure

The brochure presents two axial fan routes, with the relevant curves and drawings available for engineering review.

Product route

Sizes covered

Airflow versions and control

LWAE3G EC axial fans

710, 800 and 900 mm

Suction and blowing versions; 0–10 VDC or PWM speed control

LWAA AC axial fans

500, 630 and 800 mm

Suction versions; fixed-speed options

EC speed control allows the fan command to follow the equipment’s operating requirement. AC models provide another option for fixed-speed duties. The choice depends on the project’s airflow profile, electrical supply, control approach and mechanical layout.

Use the Curve and Drawing to Shortlist a Model

Start by locating the required airflow and static pressure on the proposed model’s P–Q curve. Check the normal duty and any peak operating condition before comparing candidate fans. Input power should be considered at the relevant operating condition, rather than inferred from a comparison of catalogue maxima.

Next, review the mounting drawing against the available space, hole positions, service access and airflow direction. A similar impeller diameter alone does not establish interchangeability. Supply voltage, frequency and control requirements also need to match the proposed configuration.

For replacement work, an existing fan’s full model code or nameplate and an installation drawing give the engineering review a more useful starting point. They can help identify whether a standard model, an adaptation or a different arrangement should be considered.

Transformer cooling and related equipment applications

LONGWELL also supplies fans and components to transformer-cooling customers. Its LWF cross-flow fan range is designed for forced-air cooling of dry-type transformers, directing airflow along winding cooling passages. Transformer cooling is a separate equipment duty from outdoor heat rejection and has its own geometry, ventilation and installation requirements.

The product photographs below show transformer-cooling samples and components. They illustrate product form rather than a completed data center installation.

LONGWELL also accepts application reviews for air-handling equipment, battery energy storage systems (BESS) and power conversion systems (PCS), with selection based on the requirements of the specific equipment.

Left: A modular transformer-cooling fan assembly supplied by LONGWELL. Right: A LONGWELL cross-flow transformer-cooling fan assembly sample.

Download the brochure and send three project inputs

Download the 12-page axial fan brochure to review the available product routes. To begin an engineering inquiry, send LONGWELL three items: your equipment application, target airflow and static pressure, and power supply requirements. An existing nameplate or drawing can be added when available.

These details support model review, sample discussions and a project quotation.

Download the 12-page axial fan brochure

Explore LONGWELL data center cooling products and engineering inquiries

Contact engineering sales

Read the dry-type transformer cooling application guide

Choose the right axial fan

Longwell manufactures 1,049 axial fans in-house. Send airflow, static pressure and voltage — an engineer replies with a matching model, performance curve and price within one working day.

Get A Quote

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Recent Articles

Categories

Archives