🔥 Get Full Catalog

ebm-papst W3G710 Alternative — LONGWELL LWAE3G710

Looking for an alternative for ebm-papst W3G710-GY01-25? The LONGWELL LWAE3G710 has the same impeller diameter. Catalogue ratings, measured curves and dimensioned drawings for every model are on the LONGWELL Fan Selector; final selection is made at your duty point. Typical applications: Large dry cooler, data center free cooling, industrial chiller condenser.

Reference model: ebm-papst W3G710-GY01-25 Diameter: Ø710 mm Family: W3G axial → LONGWELL LWBE3G / LWAE3G / LWFC Sample: 1–3 days
Reference model
ebm-papst
W3G710
W3G axial · EC axial fan · Ø710 mm
→
LONGWELL series
LONGWELL
LWAE3G710
Same impeller diameter (Ø710 mm) · dimensions per LONGWELL drawing · 15–30 day production lead time

Specification Comparison

Specification ebm-papst W3G710 LONGWELL LWAE3G710
Fan type EC axial fan EC axial fan
Impeller diameter Ø710 mm Ø710 mm 5 models
Airflow range 7,500–24,000 m³/h up to 19,177 m³/h
Static pressure (max) 420 Pa up to 258 Pa
Motor power (max) 4,800 W up to 1,146 W
Noise floor (Lw) 80 dB(A) from 75 dB(A) (nameplate, per model)
Voltage 380–480 V 3Φ 220–230 V 1Φ · 380–400 V 3Φ
Control input 0–10 V / PWM / Modbus / EC-Control 0–10 V / PWM / Modbus RTU (RS485)
IP rating IP54 / IP55 IP54 (per model)
Certifications CE · UL · VDE · EAC CE · RoHS
Sample lead time Per manufacturer quotation 1–3 days
Series lead time (≤500 units) Per manufacturer quotation 15–30 days
Pricing Per manufacturer quotation Quoted per project
Verify it on the LONGWELL selector: all 5 LWAE3G710 models — data, measured curves, drawings · LWAE3G710TS-5PKW-03 (largest airflow in the series) · check your own duty point · samples, MOQ and lead time

LWAE3G710 at a glance

Production Lead Time

15–30 days
Ex works for production batches. Stock standard models ship as samples in 1–3 days.

Pricing

Quoted per project
Price depends on model, voltage, control option and quantity. Sample fees are credited in full against the first production order.

Same Impeller Diameter

Ø710 mm
Same impeller diameter; confirm the mounting hole pattern and inlet ring against the LONGWELL drawing before ordering.

Installation and control: what to check

Mechanical

Mounting dimensions, inlet ring diameter, motor shaft height and terminal-box position of the LONGWELL LWAE3G710 are given on its dimensioned drawing. Compare them with the installed fan before ordering.

Electrical & control

The LONGWELL LWAE3G710 accepts a 0–10 V analog speed reference, PWM and Modbus RTU (RS485) control signals (per model; see the model datasheet). LONGWELL supplies its Modbus register map for BMS integration.For other bus protocols, ask LONGWELL engineering for the integration options.

Performance

The measured P-Q curve of every LONGWELL model is on its model page; we check your duty point against it before quoting.

Typical Applications

The LWAE3G710 is typically specified for Large dry cooler, data center free cooling, industrial chiller condenser. Common application categories include:

  • Large dry cooler
  • Free cooling
  • Industrial chiller

Particularly suited for large dry cooler and data center free cooling at hyperscale.

FAQ

What should I check before using LONGWELL LWAE3G710 in place of ebm-papst W3G710?
The impeller diameter is the same. Confirm the mounting hole pattern, inlet ring diameter and shaft height against the dimensioned drawing on the LONGWELL LWAE3G710 model page before ordering; the available control inputs (0–10 V / PWM / Modbus RTU) and voltages are listed in the table above.
Where can I find efficiency data for LWAE3G710?
LONGWELL does not publish a single peak-efficiency figure for the LWAE3G710. The model page on the selection site gives airflow, static pressure and input power along the curve (measured where marked, nameplate-estimated otherwise), so the efficiency at your duty point follows directly; a test report for a specific model is available from engineering on request.
What is the LONGWELL lead time?
LONGWELL LWAE3G710 ships in 15–30 days for orders up to 500 units and 6–10 weeks for 1,000+ unit OEM programs. Sample units ship in 1–3 days from stocked Ø710 mm inventory.
How is LONGWELL pricing determined?
LONGWELL quotes per project. Pricing depends on quantity, voltage, IP rating, and control protocol options.
What applications is LWAE3G710 typically used for?
LWAE3G710 is typically specified for Large dry cooler, data center free cooling, industrial chiller condenser. Particularly suited for large dry cooler and data center free cooling at hyperscale.

Evaluate a LONGWELL alternative to W3G710 — samples in 1–3 days

Send a quick request — model + quantity + delivery address. Sample unit ships in 1–3 days for field validation. Series production at 15–30 day lead time after PO.

Request Sample View Full Cross-Reference Table
Official Product Page
Browse the full EC Axial Fans range on longwellfans.com — request a quote on LWAE3G710 directly.
View on longwellfans.com →
ebm-papst® is a registered trademark of ebm-papst Group. LONGWELL is an independent manufacturer and is not affiliated with, endorsed by, or sponsored by ebm-papst. Any references to third-party trademarks are used solely for identification and comparison purposes. All performance figures reflect specific test conditions; final selection should be confirmed by duty point, voltage/control, mounting and project validation.