🔥 Get Full Catalog

ebm-papst K3G560 Alternative — LONGWELL LWBE3G560

Looking for an alternative for ebm-papst K3G560-AQ31-01? The LONGWELL LWBE3G560 has the same impeller diameter. Catalogue ratings, measured curves and dimensioned drawings for every model are on the LONGWELL Fan Selector; final selection is made at your duty point. Typical applications: Large industrial AHU, hyperscale CRAH FanGrid, BESS large-cabinet.

Reference model: ebm-papst K3G560-AQ31-01 Diameter: Ø560 mm Family: RadiCal / K3G → LONGWELL LWBE3G / LWAE3G Sample: 1–3 days
Reference model
ebm-papst
K3G560
RadiCal / K3G · EC backward-curved centrifugal plug fan · Ø560 mm
→
LONGWELL series
LONGWELL
LWBE3G560
Same impeller diameter (Ø560 mm) · dimensions per LONGWELL drawing · 15–30 day production lead time

Specification Comparison

Specification ebm-papst K3G560 LONGWELL LWBE3G560
Fan type EC backward-curved centrifugal plug fan EC backward-curved centrifugal plug fan
Impeller diameter Ø560 mm Ø560 mm 10 models
Airflow range 1,500–10,500 m³/h up to 23,896 m³/h
Static pressure (max) 1800 Pa up to 1,545 Pa
Motor power (max) 4,200 W up to 5,600 W
Noise floor (Lw) 39 dB(A) from 63 dB(A) (nameplate, per model)
Voltage 380–480 V 3Φ 380–400 V 3Φ
Control input 0–10 V / PWM / Modbus / EC-Control 0–10 V / PWM / Modbus RTU (RS485)
IP rating IP54 / IP55 IP54 (per model)
Certifications CE · UL · VDE · EAC CE · RoHS
Sample lead time Per manufacturer quotation 1–3 days
Series lead time (≤500 units) Per manufacturer quotation 15–30 days
Pricing Per manufacturer quotation Quoted per project
Verify it on the LONGWELL selector: all 10 LWBE3G560 models — data, measured curves, drawings · LWBE3G560-218NT-13 (largest airflow in the series) · check your own duty point · samples, MOQ and lead time

LWBE3G560 at a glance

Production Lead Time

15–30 days
Ex works for production batches. Stock standard models ship as samples in 1–3 days.

Pricing

Quoted per project
Price depends on model, voltage, control option and quantity. Sample fees are credited in full against the first production order.

Same Impeller Diameter

Ø560 mm
Same impeller diameter; confirm the mounting hole pattern and inlet ring against the LONGWELL drawing before ordering.

Installation and control: what to check

Mechanical

Mounting dimensions, inlet ring diameter, motor shaft height and terminal-box position of the LONGWELL LWBE3G560 are given on its dimensioned drawing. Compare them with the installed fan before ordering.

Electrical & control

The LONGWELL LWBE3G560 accepts a 0–10 V analog speed reference, PWM and Modbus RTU (RS485) control signals (per model; see the model datasheet). LONGWELL supplies its Modbus register map for BMS integration.For other bus protocols, ask LONGWELL engineering for the integration options.

Performance

The measured P-Q curve of every LONGWELL model is on its model page; we check your duty point against it before quoting.

Typical Applications

The LWBE3G560 is typically specified for Large industrial AHU, hyperscale CRAH FanGrid, BESS large-cabinet. Common application categories include:

  • Industrial AHU
  • Large CRAH FanGrid
  • Large process AHU

Particularly suited for hyperscale CRAH FanGrid 6×6 and 9-fan array configurations.

FAQ

What should I check before using LONGWELL LWBE3G560 in place of ebm-papst K3G560?
The impeller diameter is the same. Confirm the mounting hole pattern, inlet ring diameter and shaft height against the dimensioned drawing on the LONGWELL LWBE3G560 model page before ordering; the available control inputs (0–10 V / PWM / Modbus RTU) and voltages are listed in the table above.
Where can I find efficiency data for LWBE3G560?
LONGWELL does not publish a single peak-efficiency figure for the LWBE3G560. The model page on the selection site gives airflow, static pressure and input power along the curve (measured where marked, nameplate-estimated otherwise), so the efficiency at your duty point follows directly; a test report for a specific model is available from engineering on request.
What is the LONGWELL lead time?
LONGWELL LWBE3G560 ships in 15–30 days for orders up to 500 units and 6–10 weeks for 1,000+ unit OEM programs. Sample units ship in 1–3 days from stocked Ø560 mm inventory.
How is LONGWELL pricing determined?
LONGWELL quotes per project. Pricing depends on quantity, voltage, IP rating, and control protocol options.
What applications is LWBE3G560 typically used for?
LWBE3G560 is typically specified for Large industrial AHU, hyperscale CRAH FanGrid, BESS large-cabinet. Particularly suited for hyperscale CRAH FanGrid 6×6 and 9-fan array configurations.

Evaluate a LONGWELL alternative to K3G560 — samples in 1–3 days

Send a quick request — model + quantity + delivery address. Sample unit ships in 1–3 days for field validation. Series production at 15–30 day lead time after PO.

Request Sample View Full Cross-Reference Table
Official Product Page
Browse the full Backward-Curved Centrifugal EC Fans range on longwellfans.com — request a quote on LWBE3G560 directly.
View on longwellfans.com →
ebm-papst® is a registered trademark of ebm-papst Group. LONGWELL is an independent manufacturer and is not affiliated with, endorsed by, or sponsored by ebm-papst. Any references to third-party trademarks are used solely for identification and comparison purposes. All performance figures reflect specific test conditions; final selection should be confirmed by duty point, voltage/control, mounting and project validation.