🔥 Get Full Catalog

ebm-papst RadiPac 500 Alternative — LONGWELL LWBE3G500

Looking for an alternative for ebm-papst RadiPac 500? The LONGWELL LWBE3G500 has the same impeller diameter. Catalogue ratings, measured curves and dimensioned drawings for every model are on the LONGWELL Fan Selector; final selection is made at your duty point. Typical applications: L2A 60–100 kW/rack modules, CRAH FanGrid, premium CDU.

Reference model: ebm-papst RadiPac 500 Diameter: Ø500 mm Family: RadiPac pre-assembled → LONGWELL LWBE3G / LWAE3G / LWFC Sample: 1–3 days
Reference model
ebm-papst
RadiPac 500
RadiPac pre-assembled · EC plug fan pre-assembled FFU module · Ø500 mm
→
LONGWELL series
LONGWELL
LWBE3G500
Same impeller diameter (Ø500 mm) · dimensions per LONGWELL drawing · 15–30 day production lead time

Specification Comparison

Specification ebm-papst RadiPac 500 LONGWELL LWBE3G500
Fan type EC plug fan pre-assembled FFU module EC plug fan pre-assembled FFU module
Impeller diameter Ø500 mm Ø500 mm 10 models
Airflow range 1,200–8,200 m³/h up to 14,214 m³/h
Static pressure (max) 1800 Pa up to 1,541 Pa
Motor power (max) 3,000 W up to 4,200 W
Noise floor (Lw) 37 dB(A) from 66 dB(A) (nameplate, per model)
Voltage 380–480 V 3Φ 380–400 V 3Φ
Control input 0–10 V / PWM / Modbus / EC-Control 0–10 V / PWM / Modbus RTU (RS485)
IP rating IP54 / IP55 IP54 (per model)
Certifications CE · UL · VDE · EAC CE · RoHS
Sample lead time Per manufacturer quotation 1–3 days
Series lead time (≤500 units) Per manufacturer quotation 15–30 days
Pricing Per manufacturer quotation Quoted per project
Verify it on the LONGWELL selector: all 10 LWBE3G500 models — data, measured curves, drawings · LWBE3G500-188NT-08 (largest airflow in the series) · check your own duty point · samples, MOQ and lead time

LWBE3G500 at a glance

Production Lead Time

15–30 days
Ex works for production batches. Stock standard models ship as samples in 1–3 days.

Pricing

Quoted per project
Price depends on model, voltage, control option and quantity. Sample fees are credited in full against the first production order.

Same Impeller Diameter

Ø500 mm
Same impeller diameter; confirm the mounting hole pattern and inlet ring against the LONGWELL drawing before ordering.

Installation and control: what to check

Mechanical

Mounting dimensions, inlet ring diameter, motor shaft height and terminal-box position of the LONGWELL LWBE3G500 are given on its dimensioned drawing. Compare them with the installed fan before ordering.

Electrical & control

The LONGWELL LWBE3G500 accepts a 0–10 V analog speed reference, PWM and Modbus RTU (RS485) control signals (per model; see the model datasheet). LONGWELL supplies its Modbus register map for BMS integration.For other bus protocols, ask LONGWELL engineering for the integration options.

Performance

The measured P-Q curve of every LONGWELL model is on its model page; we check your duty point against it before quoting.

Typical Applications

The LWBE3G500 is typically specified for L2A 60–100 kW/rack modules, CRAH FanGrid, premium CDU. Common application categories include:

  • L2A 60–100 kW/rack
  • CRAH FanGrid module
  • Premium CDU

Particularly suited for 60–100 kW/rack L2A modules for AI training campus.

FAQ

What should I check before using LONGWELL LWBE3G500 in place of ebm-papst RadiPac 500?
The impeller diameter is the same. Confirm the mounting hole pattern, inlet ring diameter and shaft height against the dimensioned drawing on the LONGWELL LWBE3G500 model page before ordering; the available control inputs (0–10 V / PWM / Modbus RTU) and voltages are listed in the table above.
Where can I find efficiency data for LWBE3G500?
LONGWELL does not publish a single peak-efficiency figure for the LWBE3G500. The model page on the selection site gives airflow, static pressure and input power along the curve (measured where marked, nameplate-estimated otherwise), so the efficiency at your duty point follows directly; a test report for a specific model is available from engineering on request.
What is the LONGWELL lead time?
LONGWELL LWBE3G500 ships in 15–30 days for orders up to 500 units and 6–10 weeks for 1,000+ unit OEM programs. Sample units ship in 1–3 days from stocked Ø500 mm inventory.
How is LONGWELL pricing determined?
LONGWELL quotes per project. Pricing depends on quantity, voltage, IP rating, and control protocol options.
What applications is LWBE3G500 typically used for?
LWBE3G500 is typically specified for L2A 60–100 kW/rack modules, CRAH FanGrid, premium CDU. Particularly suited for 60–100 kW/rack L2A modules for AI training campus.

Evaluate a LONGWELL alternative to RadiPac 500 — samples in 1–3 days

Send a quick request — model + quantity + delivery address. Sample unit ships in 1–3 days for field validation. Series production at 15–30 day lead time after PO.

Request Sample View Full Cross-Reference Table
Official Product Page
Browse the full FFU Fans & Motors range on longwellfans.com — request a quote on LWBE3G500 directly.
View on longwellfans.com →
ebm-papst® and RadiPac® are registered trademarks of ebm-papst Group. LONGWELL is an independent manufacturer and is not affiliated with, endorsed by, or sponsored by ebm-papst. Any references to third-party trademarks are used solely for identification and comparison purposes. All performance figures reflect specific test conditions; final selection should be confirmed by duty point, voltage/control, mounting and project validation.