Refrigerator and Freezer Fan Motors
Refrigerators, freezers, bottle coolers, display cases and small walk-ins use small fan motors in two places. The evaporator fan circulates cold air through the cabinet; the condenser fan blows across the condenser coil to reject heat. If either stops, the cabinet warms up, frost builds or the compressor overheats.
LONGWELL manufactures shaded-pole and ECM (electronically commutated) fan motors, fan blades and compact fans for refrigeration OEMs and for replacement-part distributors.

Shaded-pole or ECM motor?
| Shaded-pole motor | ECM (EC) motor | |
|---|---|---|
| Design | Simple single-phase AC induction motor | Brushless motor with built-in electronics |
| Strengths | Low cost, rugged, widely used | Lower power draw for the same airflow, speed options, cooler running |
| Speed control | Fixed speed | 1–3 speeds or stepless |
| Typical use | Standard evaporator and condenser fans | Energy-focused designs and drop-in upgrades of shaded-pole motors |
What to specify
- Evaporator or condenser position, and the cabinet temperature (cooler or freezer)
- Voltage and frequency (e.g. 115 V 60 Hz, 230 V 50 Hz, or 24/48 V DC)
- Output power or the airflow needed with your blade
- Rotation direction, shaft diameter and length
- Mounting: bracket, flange or wire grid
- Blade diameter and pitch, if supplied as an assembly
- Moisture and defrost conditions
LONGWELL refrigeration fan motors
- Shaded-pole motors (LWSPM series): 100–240 V or 230 V 50 Hz versions, insulation class A/E/B/F, oil or rolling bearings, shaft diameters from 3.17 mm to 6.0 mm. Operating range -15 to +80 °C.
- YZ / YZF shaded-pole fan motors: 33–120 W, 220–240 V 50/60 Hz or 110–120 V 60 Hz, for radiators, evaporators and other refrigeration equipment. Operating range -30 to +60 °C.
- ECM Q-type motors (7108 / 7112 / 7120): designed as replacements for traditional shaded-pole motors in the same mounting dimensions. AC 100–120 V, 110–220 V or 160–250 V, or DC 24 V / 48 V; 7, 12 or 25 W output; CCW, reverse-on-start or reverse-on-demand; 1–3 speeds or stepless; -40 to 50 °C ambient; grid, flange or bracket mounting; supplied with fan blades.
- DC refrigeration evaporator centrifugal fans and compact axial fans for display coolers and vending machines.
Browse: shaded-pole motors · condenser cooling fans · compact axial fans
Download: shaded-pole motor catalogue · ECM Q-type motor · DC evaporator centrifugal fan
Related: refrigeration and freezer units · evaporators · bottle coolers
Replacement motors
Yes. LONGWELL can provide replacement candidates for many mainstream refrigerator and freezer fan motors, including ECM motors that fit the mounting of existing shaded-pole motors. Send the nameplate, shaft size, rotation and mounting; the final model is confirmed by fit, airflow and a test in the cabinet.
What to include in your enquiry
- Equipment type and fan position (evaporator / condenser)
- Voltage, frequency, power or the existing nameplate
- Shaft, rotation, mounting; blade needed or not
- Shaded-pole or ECM preference
- Annual quantity
Ask for a refrigeration fan motor quote →
FAQ
What does a freezer evaporator fan motor do?
It circulates cold air from the evaporator coil through the freezer, so the whole cabinet stays at temperature.
Can an ECM motor replace a shaded-pole motor?
Often, yes. LONGWELL’s Q-type ECM motors are made to fit the mounting of traditional shaded-pole motors. Check voltage, rotation and airflow with your fan blade.
Why is my refrigerator condenser fan not working?
Common causes are a seized bearing, a blocked blade or a failed motor winding. Replace the motor with one of the same voltage, rotation and mounting.
Do you supply 115 V 60 Hz fan motors?
Yes. Shaded-pole motors are listed for 110–120 V 60 Hz, and ECM motors for AC 100–120 V.